mstp scope
Configures VLANs in Multiple Spanning Tee Protocol (MSTP) mode.
Command Default
No VLAN is under direct MSTP control.
Parameters
Modes
Global configuration mode
Usage Guidelines
When the mstp scope
all command is issued, the ports associated to VLANs in which any STP
is configured transition to the blocking state. You must enter the mstp start command to
re-converge the ports, VLANs, and VEs.
MSTP is not operational until the
mstp start command is configured. You cannot start MSTP+ unless at least one MSTP+ instance
of MSTP+ is configured.
The
no form of this command removes the MSTP PVST mode and restores the device to non-MSTP
mode.
History