router vrrp-extended

Globally enables Virtual Router Redundancy Protocol Extended (VRRP-E) and enters VRRP-E router configuration mode.
Syntax
router vrrp-extended
no router vrrp-extended
Command Default

VRRP-E is not globally enabled.

Modes

Global configuration mode

Usage Guidelines

After globally enabling VRRP-E, nearly all subsequent VRRP-E configuration is performed at the interface level. VRRP-E must be enabled globally before configuring VRRP-E instances.

Note: Only 16 VRRP instances are configurable on the ICX 7150 device.

The no form of the command globally disables VRRP-E.

Examples

The following example globally enables VRRP-E and enters interface configuration mode. 

device# configure terminal
device(config)# router vrrp-extended
device(config-vrrpe-router)# interface ethernet 1/1/5
device(config-if-e1000-1/1/5)# ip address 10.53.5.3/24
device(config-if-e1000-1/1/5)# ip vrrp-extended vrid 1
device(config-if-e1000-1/1/5-vrid-1)# backup priority 110
device(config-if-e1000-1/1/5-vrid-1)# version 2
device(config-if-e1000-1/1/5-vrid-1)# ip-address 10.53.5.254
device(config-if-e1000-1/1/5-vrid-1)# activate
VRRP-E router 1 for this interface is activating
Parent topic: Commands O, P, Q, R, and Sa through Sh