`mvrp applicant-mode`

Configures the applicant state of the port that defines the Multiple VLAN Registration Protocol (MVRP) participation of the port.

Syntax

mvrp applicant-mode { non-participant | normal-participant }

Command Default

The applicant mode of the port is as a normal participant.

Parameters

non-participant: Sets the MVRP applicant state of the port to non-participant mode and prohibits MVRP PDU transmission on the port.

normal-participant: Resets the MVRP applicant state of the port to participant mode and continues VLAN registration and propagation of VLAN information.

Modes

Interface configuration mode

Usage Guidelines

The applicant state of the access ports must be set as non-participant to ensure that MVRP PDUs are not exchanged on those ports.

The no form of the command is non-operational.

Examples

The following example configures the MVRP applicant state of the port to non-participant mode.

device# configure terminal
device(config)# interface ethernet 1/1/25
device(config-if-e1000-1/1/25)# mvrp applicant-mode non-participant

History

Release version	Command history
08.0.90	This command was introduced.

mvrp applicant-mode