`show ipv6 pim rp-set`

Displays rendezvous-point (RP)-set list for the device elected as the bootstrap router (BSR).

Syntax

show ipv6 pim [ all-vrf | vrf vrf-name ] rp-set

Parameters

Modes

User EXEC mode

The show ipv6 pim rp-set command displays the following information:

Output Field	Description
Number of group prefixes	The number of IPv6 PIM Sparse group prefixes for which the RP is responsible.
Group prefix	Indicates the multicast groups for which the RP listed by the previous field is a candidate RP.
RPs expected or received	Indicates how many RPs were expected and received in the latest Bootstrap message.
RP num	Indicates the RP number. If there are multiple RPs in the IPv6 PIM Sparse domain, a line of information for each of them is listed, and they are numbered in ascending numerical order.
priority	The RP priority of the candidate RP. During the election process, the candidate RP with the highest priority is elected as the RP.
age	The age (in seconds) of this RP-set. Note: If this device is not a BSR, this field contains zero. Only the BSR ages the RP-set.

Examples

The following example shows the RP set list.

device> show ipv6 pim rp-set
Static RP
---------
Static RP count: 1
100::1
Number of group prefixes Learnt from BSR: 0
No RP-Set present

show ipv6 pim rp-set