neighbor peer-group
Configures a BGP neighbor to be a member of a peer group.
Syntax
neighbor
{
ip-address
|
ipv6-address
}
peer-group
string
no neighbor
{
ip-address
|
ipv6-address
}
peer-group
string
Parameters
Modes
BGP configuration mode
BGP address-family IPv4 unicast VRF configuration mode
BGP address-family IPv6 unicast VRF configuration mode
Usage Guidelines
The
no form of the command removes a neighbor from the peer group.
Examples
The following example assigns a specified neighbor to a peer group called “mypeergroup1”.
device# configure terminal device(config)# router bgp device(config-bgp-router)# neighbor 10.11.12.13 peer-group mypeergroup1
The following BGP4+ example, for VRF instance "red," assigns a specified neighbor to a peer group called "mypeergroup1".
device# configure terminal device(config)# router bgp device(config-bgp-router)# address-family ipv6 unicast vrf red device(config-bgp-ipv4u)# neighbor 2001:2018:8192::125 peer-group mypeergroup1
History
| Release version | Command history |
|---|---|
| 08.0.30 | Support was added for the BGP address-family IPv6 unicast VRF configuration mode. |