New in This Document

Information has been added or updated to reflect new FastIron features or enhancements to existing FastIron features.

For commands introduced since Release 08.0.01, a history table is included with each command to provide details about the modifications to that command. For commands introduced prior to Release 08.0.01, a history table is not provided, unless the command has been modified in recent releases.

Note: In addition to commands that are new or modified for this release, commands for existing FastIron features may have been added that were previously described only in FastIron configuration guides.

New Commands for FastIron 10.0.10g_cd10

No new commands have been added (new for this release).

Modified Commands for FastIron 10.0.10g_cd10

The following command has been modified (updated for this release):

  • fec

Deprecated Commands for FastIron 10.0.10g_cd10

No commands have been deprecated for this release.

New Commands for FastIron 10.0.10h07

The following command has been added (new for this release):

  • show manager service-validation status

Modified Commands for FastIron 10.0.10h07

No commands have been modified (updated for this release).

Deprecated Commands for FastIron 10.0.10h07

No commands have been deprecated for this release.

New Commands for FastIron 10.0.10h05

The following commands have been added (new for this release):

  • default ip address enable
  • ip tcp-mtu-probing
  • stp-bpdu tx-filter

Modified Commands for FastIron 10.0.10h05

The following command has been modified (updated for this release).

  • server (NTP)
  • show issu status

Deprecated Commands for FastIron 10.0.10h05

No commands have been deprecated for this release.

New Commands for FastIron 10.0.10h_cd1

The following commands have been added (new for this release):

  • authentication mac-authentication lldp-override
  • ip ssl disable-weak-ciphers
  • mac-authentication lldp-override
  • show installed-packages
  • show installed-packages detail
  • show logging debug analyse statistics

Modified Commands for FastIron 10.0.10h_cd1

The following commands have been modified (updated for this release).

  • led mode
  • logging-rate-limit
  • show ip ssh
  • show logging debug

Deprecated Commands for FastIron 10.0.10h_cd1

No commands have been deprecated for this release.

New Commands for FastIron 10.0.10g_cd1

The following commands have been added (new for this release):

  • enable privilege-mode password

Modified Commands for FastIron 10.0.10g_cd1

The following commands have been modified (updated for this release).

  • copy scp flash
  • show access-list tcam
  • show manager log
  • show manager sessions
  • show manager status
  • supportsave

Deprecated Commands for FastIron 10.0.10g_cd1

No commands have been deprecated for this release.

New Commands for FastIron 10.0.10f

The following commands have been added (new for this release):

  • bootfile-url
  • chassis led off
  • controller-address (DHCPv6)
  • ipv6 address autoconfig
  • ipv6 dhcp6-client auto-update enable
  • led mode
  • show ipv6 dhcp6-client options
  • wired direct-clients enable

Modified Commands for FastIron 10.0.10f

The following commands have been modified (updated for this release).

  • ip dhcp-server pool
  • ip tftp blocksize
  • radius-server key
  • show optic
  • show tech-support
  • static-port-ip-mapping
  • supportsave
  • trace-l2
  • username

Deprecated Commands for FastIron 10.0.10f

The following command has been deprecated for this release.

  • aaa authentication snmp-server

RUCKUS ICX 8100 Layer 3 Support

The following Layer 3 features are not supported for RUCKUS ICX 8100 devices:

  • BGP4
  • BGP4+
  • GRE
  • IP MAC addresses
  • MSDP
  • MTU
  • Multi-VRF
  • OSPFv2
  • OSPFv3
  • PBR
  • PIM
  • PIM6
  • RIPv1
  • RIPv2
  • RIPng
  • TCP MSS
  • Tunnels
  • uRPF
  • VRRPv2
  • VRRPv3
  • VRRP-E
  • VRRP-E Short Path Forwarding

License commands are not supported for ICX 8100 devices.

New Commands for FastIron 10.0.10d

The following commands have been added (new for this release):

  • delay-server
  • ip ssh message-authentication-code

Modified Commands for FastIron 10.0.10d

The following commands have been modified (updated for this release).

  • enable user password-masking
  • username

Deprecated Commands for FastIron 10.0.10d

The following command has been deprecated in this release.

  • ip ssh message-authentication-code disable-hmac-sha1

RUCKUS ICX 7150 Layer 3 Support

Layer 3 features for the RUCKUS ICX 7150 are supported. The following Layer 3 features are not supported for all RUCKUS ICX 7150 devices:

  • BGP4
  • BGP4+
  • Multi-VRF
  • Tunnels
  • uRPF

Additionally, the following Layer 3 features are not supported for ICX 7150-C12P-ES, ICX 7150-24P-ES, and ICX 7150-48P-ES devices:

  • IP MAC addresses
  • IPv4 Multicast Routing
  • IPv6 Multicast Routing
  • OSPFv2
  • OSPFv3
  • PBR
  • RIPv2
  • RIPv3
  • RIPng
  • TCP MSS
  • VRRPv2
  • VRRPv3
  • VRRP-E
  • VRRP-E Short Path Forwarding

License commands are not supported for RUCKUS ICX 7150-ES devices.

RESTCONF is not supported for RUCKUS ICX 7150-ES devices.

Reintroduced Commands for FastIron 10.0.10c

The following command has been reintroduced in this release:

  • ip ssh message-authentication-code disable-hmac-sha1

New Commands for FastIron 10.0.10c

The following commands have been added (new for this release):

  • bsicloud enable
  • ip dhcp-client information enable
  • ip ssh delete-known-host-key
  • ip ssh host-key-method
  • ip ssh stricthostkeycheck
  • show ip dhcp-client information

Modified Commands for FastIron 10.0.10c

The following commands have been modified (updated for this release).

  • crypto key generate
  • ip ssh encryption
  • ip ssh key-exchange-method
  • radius-server host

Deprecated Commands for FastIron 10.0.10c

The following command has been deprecated in this release.

Deprecated Commands for FastIron 10.0.0.0.10c

Command Replaced By Replacement Notes
ip ssh encryption aes-only No replacement This function is no longer supported.

New Commands for FastIron 10.0.10b

No new commands have been added (new for this release).

Re-Introduced Commands for FastIron 10.0.10b

The following commands have been re-introduced in this release.

  • aaa authentication login privilege-mode

Modified Commands for FastIron 10.0.10b

The following commands have been modified (updated for this release).

  • manager connect
  • manager disconnect
  • manager query
  • manager registrar-query-restart
  • manager reset

Re-Introduced Commands for FastIron 10.0.10

The following commands have been re-introduced for this release:

  • chassis fanless
  • dynamic-bootp
  • extend vlan-range (VXLAN)
  • failure-detection (VXLAN)
  • ip dhcp-server bootp ignore
  • ip dhcp-server use-port-name
  • map vlan-range (VXLAN)
  • nslookup
  • static-port-ip-mapping
  • vxlan-riot

New Commands for FastIron 10.0.10

The following commands have been added (new for this release):

  • port-profile
  • show port-profile
  • show port-profile-mac-oui
  • show port-profile-lldp

Modified Commands for FastIron 10.0.10

The following commands have been modified (updated for this release).

  • radius-server host
  • radius-server key
  • show manager status
  • show overlay-gateway
  • site (VXLAN)
  • tacacs-server host
  • tacacs-server key

Deprecated Commands for FastIron 10.0.10

No commands have been deprecated in this release.

Other Enhancements in FastIron release 10.0.10

Feature

Description

Location

Minor editorial updates

Minor editorial updates were made throughout the Command Reference.

All chapters.

Updates to address defects

Minor updates on commands throughout to address defects.

All chapters.

Parent topic: About This Document