show breakout
Displays information on 10 Gbps sub-ports broken out from 40 Gbps ports on certain
FastIron devices.
Modes
Privileged EXEC mode
Usage Guidelines
The
show breakout command is available only on ICX 7750 devices.
The
show breakout command displays the following information:
| Output field | Description |
|---|---|
| Port | Specifies the port for which breakout information is displayed to the right. |
| Module Exist | Indicates whether the module on which the specified port resides is present in the unit. |
| Module Conf | Indicates whether the module on which the specified port resides is configured. |
| Breakout-config | Indicates whether breakout is configured on the specified port. |
| Breakout-oper | Indicates whether sub-ports on the specified breakout port are operational. |
Examples
The following example shows that port 1/2/1 has been configured for breakout into four 10 Gbps sub-ports and is operational (has active sub-ports). Ports 1/2/2 and 1/2/4 are configured for breakout, pending reload.
Device# show breakout Unit-Id: 1 Port Module Exist Module Conf Breakout-config Breakout-oper 1/2/1 yes no yes yes 1/2/2 yes no yes no 1/2/3 yes no no no 1/2/4 yes no yes no 1/2/5 yes no no no 1/2/6 yes no no no 1/3/1 yes no no no 1/3/2 yes no no no 1/3/3 yes no no no 1/3/4 yes no no no 1/3/5 yes no no no 1/3/6 yes no no no
History
| Release version | Command history |
|---|---|
| 08.0.30 | This command was introduced. |