show dot1x sessions detail
Displays 802.1X authentication sessions at the global and interface levels.
Parameters
Modes
Privileged EXEC mode
Usage Guidelines
Verify for the "detail" command.
A client session can have an IPv4 address and multiple IPv6 addresses. When multiple
addresses exist, the
show dot1x sessions detail command displays all addresses for the session.
The
show dot1x sessions detail command displays the following information.
Update table for detail command.
| Output field | Description |
|---|---|
| Port | Port number. |
| MAC Addr | MAC address of the client. |
| IP Addr | IP address or addresses of the client (a session can have an IPv4 address and multiple IPv6 addresses). IP addresses of the authenticated host are only displayed when an IP ACL is applied to the interface based on the RADIUS server response. |
| User Name | User name. |
| Vlan | VLAN ID. |
| Auth State | Authentication state. |
| ACL | Specific applied ACL. |
| Session Time | Session time. |
| Age | Age of the session. |
| PAE State | Port access entity state. |
Examples
The following example displays details for 802.1X authentication sessions on a specific interface.
Output is not for details command. Update output with real example.
device(config)# show dot1x sessions ethernet 2/1/1
---------------------------------------------------------------------------------------------
Port MAC IP User Vlan Auth ACL Session Age PAE
Addr Addr Name State Time State
---------------------------------------------------------------------------------------------
2/1/1 0010.9400.1303 192.85.1.2 User1 200 permit Yes 100 Ena AUTHENTICATED
History
| Release version | Command history |
|---|---|
| 08.0.70 | This command was introduced. |