show spx cb-port
Displays information on the Port Extender (PE) chain attached to the designated control
bridge (CB) port number in a Switch Port Extender (SPX) system.
Parameters
Modes
All modes
Usage Guidelines
To display information for an entire LAG, any port in the LAG can be entered.
Examples
The following example of the
show spx cb-port command provides information on PEs attached to CB port 2/1/3.
ICX7750-48F Router# show spx cb-port 2/1/3
Show PEs attached to a CB port 2/1/3
T=17m33.5: alone: standalone, D: dynamic cfg, S: static
ID Type Role Mac Address Pri State Comment
1 S ICX7750-48XGF member 0000.0000.0000 100 reserve
2 S ICX7750-48XGF active cc4e.246d.d080 200 local Ready
3 S ICX7750-48XGF standby cc4e.24d2.2680 200 remote Ready
17 S ICX7250-24 spx-pe cc4e.24dc.b60e N/A remote InProg
18 S ICX7250-48 spx-pe cc4e.24e4.5426 N/A remote Ready
23 S ICX7250-48 spx-pe cc4e.24e1.e38a N/A remote Ready
56 S ICX7250-24 spx-pe cc4e.24dc.c2b6 N/A remote Ready
active standby
+---+ +---+
-2/4| 2 |2/1--2/4| 3 |2/1-
| +---+ +---+ |
| |
|------------------------|
+----+ +----+ +----+ +----+
2/1/3==2/1| 56 |1/1==1/3| 17 |1/1==1/3| 18 |1/1==1/3| 23 |2/1==3/1/3
+----+ +----+ +----+ +----+
History
| Release version | Command history |
|---|---|
| 08.0.40 | This command was introduced. |