show spx pe-group

In a Switch Port Extender (SPX) system, specifies the port extender (PE) group for which the PE chain is displayed.
Syntax
show spx pe-group { name }
Parameters
name
Specifies the PE group name.
Modes

All modes

The show spx pe-group command displays the following information:

Output field Description
ID The SPX unit ID number (CB or PE; PE units are numbered from 17 through 56).
"S" or "D" Static or Dynamic. Indicates whether the configuration has been saved to memory. Dynamic configurations are lost when the unit is removed.
Type FastIron device model (SKU).
Role Lists the role of the unit in the SPX system: active (active controller in the CB stack), member (CB stack member), standby (standby controller for the CB stack), or spx-pe (PE unit).
Mac Address The MAC address of the unit.
Pri The priority of the unit.
State Displays the state of the unit: Local (unit from which the command was entered), remote (unit is not local), or reserve (indicates a reserved rather than an active unit).
Comment

Ready (unit is operational).

Synchronizing (output example: 21 S ICX7450-24G spx-pe cc4e.248b.a448 N/A remote Synchronizing (st=13)).

Examples
Valid non-7750 example needed.

The following example displays information for an SPX PE group. 

device(config)# show spx pe-group GROUP1
Show PEs attached to pe-group GROUP1 (port 2/1/41)
T=2h56m13.3: alone: standalone, D: dynamic cfg, S: static
ID   Type          Role    Mac Address    Pri State   Comment                   
1  S ICX7750-48XGF active  cc4e.2438.7e80 128 local   Ready
2  S ICX7750-48XGF standby cc4e.246e.cd80 128 remote  Ready
17 S ICX7450-48P   spx-pe  cc4e.248b.da60 N/A remote  Ready
18 S ICX7450-24G   spx-pe  cc4e.246c.e3f8 N/A remote  Ready

    standby      active                                                        
     +---+        +---+                                                        
  2/4| 2 |2/1--2/1| 1 |2/4                                                     
     +---+        +---+                                                       

            +----+        +----+                                               
 2/1/41--2/4| 17 |1/1==1/1| 18 |                                               
            +----+        +----+
History
Release version Command history
08.0.40 This command was introduced.
Parent topic: Show Commands