dynamic-bootp
Enables the Dynamic Host Configuration
Protocol (DHCP) server to assign an IP address or a range of IP addresses to the
Bootstrap
Protocol (BOOTP) clients within its address pool.
Command Default
Dynamic BOOTP is disabled at the DHCP server address pool.
Modes
DHCP server pool configuration mode
Usage Guidelines
The no form of the command disables the DHCP server from assigning an IP address to the BOOTP clients.
Examples
The following example enables the DHCP server to assign an IP address or a range of IP addresses to the BOOTP clients within its address pool.
device# configure terminal device(config)# ip dhcp-server enable device(config)# no ip dhcp-server bootp ignore device(config)# ip dhcp-server pool GenericOption device(config-dhcp-GenericOption)# dhcp-default-router 10.10.70.1 device(config-dhcp-GenericOption)# network 10.10.70.0 255.255.254.0 device(config-dhcp-GenericOption)# lease 1 0 0 device(config-dhcp-GenericOption)# dns-server 10.10.64.1 8.8.8.8 device(config-dhcp-GenericOption)# domain-name office.s-cloud.net device(config-dhcp-GenericOption)# dynamic-bootp
History
| Release version | Command history |
|---|---|
| 09.0.10d | This command was introduced. |
| 10.0.10 | This command was re-introduced. |