extend vlan add (VXLAN)

Configures a VLAN to be extended over the VXLAN tunnel to the designated remote site.
Syntax
extend vlan add vlan id
no extend vlan add vlan id
Command Default

VLAN extension is not set.

Parameters
vlan id
Specifies the VLAN to be extended to the VXLAN remote site.
Modes

Overlay-gateway site configuration mode

Usage Guidelines

The no form of the command removes the extended VLAN configuration.

The command is supported only on ICX 7750 devices.

The VLAN must already be mapped to a VNI before it is extended over the gateway.

Examples

The following example sets VLAN 10 to be extended over the remote site. 

device# configure terminal
device(config)# overlay-gateway gate
device(config-overlay-gw-gate1)# map vlan 10 to VNI 888
device(config-overlay-gw-gate1)#site site1
device(config-overlay-gw-gate1-site1)# extend vlan add 10
History
Release version Command history
08.0.70 This command was introduced.
Parent topic: Commands D through H