tftp client enable

Configures the device to allow TFTP access only to clients in a specific VLAN.
Syntax
tftp client enable vlan vlan-num
no tftp client enable vlan vlan-num
Command Default

TFTP client access is enabled for all the clients.

Parameters
vlan vlan-num
Configures access only to clients connected to ports within the VLAN.
Modes

Global configuration mode

Usage Guidelines

You can restrict TFTP access to a RUCKUS device to ports within a specific port-based VLAN. VLAN-based access control works in conjunction with other access control methods. Clients connected to ports that are not in the VLAN are denied management access.

The no form of the command allows access to all clients.

Examples

The following example shows how to allow TFTP access only to clients connected to ports within port-based VLAN 40. 

device(config)# tftp client enable vlan 40
Parent topic: Commands Si - Z