telnet client
Restricts Telnet access to a host with the specified IP address.
Syntax
telnet client
{
ipv4-address
[
client-mac
]
|
any
client-mac
|
ipv6
ipv6-address
}
no telnet client
{
ipv4-address
[
client-mac
]
|
any
client-mac
|
ipv6
ipv6-address
}
Command Default
Remote Telnet access is not restricted.
Parameters
Modes
Global configuration mode
Usage Guidelines
The syntax of this command and the description need to be verified. They differ from
the security guide, which shows a mac address used in combination with an IPv6 address.
You can specify only one IP address with one command. However, you can enter the command ten times to specify up to ten IP addresses.
The
no form of the command removes the restriction and allows Telnet access to all the clients.