sz registrar-list

Allows administrators to clear addresses learned via the switch registrar from the SmartZone node list.
Syntax
no sz registrar-list { ip-address } [ ip-address ]
Parameters
ip-address
Specifies an IP addressed learned via the SmartZone registrar.
Modes

Global configuration mode

Usage Guidelines

The no form of the command clears the specified IP address from the SmartZone registrar list. Only the no form of the command is valid on ICX devices.

You can enter one or two IP addresses on the command line.

Examples

The following example clears the entry for IP address 8.8.01 from the list of SmartZone IP addresses learned by the Ruckus switch registrar. 

device(config)# no sz-registrar 8.8.0.1
History
Release version Command history
08.0.80c This command was introduced.
Parent topic: Commands Si - Z