sz active-list
SmartZone IP addresses are not configured on the switch, which means the switch will attempt to initiate a connection with SmartZone using the SmartZone IP addresses provided via DHCP Option 43.
Global configuration
Use the no form of the
sz active-list command to remove the SmartZone IP addresses.
Beginning with SmartZone release 5.0, SmartZone can be used to monitor and manage
ICX switches. An ICX switch identifies SmartZone and initiates a connection based
on the SmartZone IP addresses configured on the switch with the
sz active-list command or discovered through DHCP Option 43.
If the SmartZone IP addresses are both configured on the device and provided by DHCP Option 43, the configured list on the switch takes priority over DHCP Option 43. If none of the IP addresses in the configured list are reachable, the switch will try to reach the addresses received by DHCP Option 43.
Both "active" and "passive" SmartZone IP addresses can be configured on the ICX switch. Active IP addresses are given the highest priority; passive IP addresses are lowest priority and are provided for redundancy. The ICX switch will attempt to connect to SmartZone by sending a query to SmartZone IP addresses in the following order:
- SmartZone IP addresses configured on the ICX switch using the
sz active-listcommand - SmartZone IP addresses received through DHCP Option 43
- Backup SmartZone IP addresses configured on the ICX switch using the
sz passive-listcommand
The switch connects to SmartZone using a reverse SSH tunnel.
| Release version | Command history |
|---|---|
| 08.0.80 | This command was introduced. |