spx zero-touch-deny

Configures a standalone unit so that it cannot be discovered by the SPX zero-touch or SPX interactive-setup utility.
Syntax
spx zero-touch-deny
no spx zero-touch-deny
Command Default

By default, an eligible unit is discoverable (within a presentable configuration).

Modes

Global configuration mode

Usage Guidelines

The no form of the command returns the unit to a discoverable state. It does not re-enable the zero-touch feature, however.

The spx zero-touch-deny command also removes zero-touch-enable and spx pe-enable under SPX CB configuration.

The command can be entered from an ICX 7250 or an ICX 7450 standalone.

The command cannot be applied to an ICX 7250 or ICX 7450 that is already in Provisional-PE or PE mode.

If you configure spx pe-enable on a device, the spx zero-touch-deny configuration is removed. Likewise, the spx zero-touch-deny command removes the spx pe-enable command.

Examples

The following example configures the unit so that it cannot be discovered as an SPX PE candidate. 

device# configure terminal
device(config)# spx zero-touch-deny
History
Release version Command history
08.0.50 This command was introduced.
Parent topic: Commands Si - Z