spx unconfigure
Provisional-PE mode
PE mode
CB router mode
The
spx unconfigure all command can be issued only on a CB. This form of the command removes the SPX startup
file of every PE and CB unit in the SPX domain. It also reloads all PE units. The
CB unit from which the command is issued and other CB units in the configuration are
not reloaded.
The
spx unconfigure
id command can be issued only from a CB. It removes the PE startup file of the specified
PE and reloads it.
The
spx unconfigure
unit-id
id-list command can be issued only from a CB. It removes the PE startup file of multiple
specified PEs and reloads them.
The spx unconfigure me command removes the PE startup file from the PE unit on which the command is issued.
The startup configuration file for regular mode is not affected. If it is a PE unit,
it reloads. A device in regular mode or in Provisional-PE mode does not reload.
The startup configuration file for regular mode is not affected by the
spx unconfigure command.
In the following example, the
spx unconfigure me command is entered on a PE unit.
[PE]local-id@device# spx unconfigure me This unit will remove the PE startup file and reload as a standalone. Are you sure? (enter 'y' or 'n'):
The following example shows the system response when the
spx unconfigure me command is entered in Provisional-PE mode (on a PE that is configured but for which
the configuration has not been written to memory and reloaded).
[Provisional-PE]device# spx unconfigure me This unit will remove the PE startup file. Are you sure? (enter 'y' or 'n'):
| Release version | Command history |
|---|---|
| 08.0.40 | This command was introduced. |
| 08.0.50 | The unit-id key word was added to allow for a list of IDs to be unconfigured simultaneously. |