module (SPX)

Manually configures SPX module information.
Syntax
module id module-name
no module id module-name
Command Default

SPX module information is learned and system-generated by default.

Parameters
id
Identifies the module. Must be a number from 1 through 4.
module-name
Identifies the module type, for example, icx7450-24-port-management-module.
Modes

SPX unit configuration mode (CB only)

Usage Guidelines

The no form of the command followed by the module number and the exact module name removes the module from the SPX configuration.

When you create a reserved SPX unit, you must configure modules for the unit. The base module 1 must be configured before other modules.

When you configure a reserved SPX unit, the system will not generate default SPX ports or SPX LAGs for the unit.

The CB can add or remove a reserved module for a live PE unit.

Examples

The following example configures module 1 for SPX unit 21. 

device# configure terminal
device(config)# spx unit 21
device(config-spx-unit-21)# module 1 icx7450-48f-sf-port-management-module 
device(config-spx-unit-21)# spx-port 21/2/4
device(config-spx-unit-21)# exit
device(config)# exit
History
Release version Command history
08.0.40 This command was introduced.
Parent topic: Commands M