manager source-interface

Specifies the interface to be used by the ICX-Manager to manage the ICX device in on-premises installations.
Syntax
manager source-interface { ethernet unit / slot / port | lag num | loopback num | management num | ve num }
no manager source-interface { ethernet unit / slot / port | lag num | loopback num | management num | ve num }
Command Default

The ICX-Manager uses the IP address of the management port on the ICX device as the source interface.

Parameters
ethernet unit / slot / port
Specifies the Ethernet port to be used as the ICX-Manager source interface.
lag num
Specifies the ID (decimal value) of the LAG interface to be used as the ICX-Manager source interface.
loopback num
Specifies the ID (decimal value) of the loopback interface to be used as the ICX-Manager source interface.
management num
Specifies the ID (decimal value) of the management interface to be used as the ICX-Manager source interface.
ve num
Specifies the ID (decimal value) of the virtual interface to be used as the ICX-Manager source interface.
Modes

Global configuration mode

Usage Guidelines

The manager source-interface command is supported only on ICX devices running a router image.

The lowest IP address configured on the specified interface is sent to the ICX-Manager in the manager query. If there is no source-interface configuration, the management IP address is sent.

The no form of the command removes the source-interface configuration and returns to the default source interface (the management port).

Examples

The following example configures an Ethernet port as the source interface for the ICX-Manager.

device# configure terminal
device(config)# manager source-interface Ethernet 1/1/3

The following example configures a virtual interface as the source interface for the ICX-Manager.

device# configure terminal
device(config)# manager source-interface ve 10

The following example configures a management interface as the source interface for the ICX-Manager.

device# configure terminal
device(config)# manager source-interface management 1

The following example configures as the source interface for the ICX-Manager.

device# configure terminal
device(config)# manager source-interface 

The following example configures a LAG interface as the source interface for the ICX-Manager.

device# configure terminal
device(config)# manager source-interface lag 1

The following example configures a loopback interface as the source interface for the ICX-Manager.

device# configure terminal
device(config)# manager source-interface loopback 1
History
Release version Command history
08.0.92 This command was introduced.