management-vlan

Configures a VLAN to be a part of the management VLAN.
Syntax
management-vlan
no management-vlan
Command Default

A Vlan is not part of the management VLAN.

Modes

VLAN configuration mode

Usage Guidelines

When this command is used, the out-of-band (OOB) interface port is not disabled. The port remains accessible to management even if in-band interface ports are busy forwarding packets at line rate. No packets are shared between the OOB management port and the in-band port.

The port is treated as an untagged port.

The management-vlan command is available only in the FastIron switch image.

Use the no form of the command to remove the VLAN from the management VLAN.

Examples

The following example specifies a VLAN and assign it to the management VLAN: 

device# configure terminal
device(config)# vlan 20
device(config-vlan-20)# management-vlan

The following example removes the VLAN from the management VLAN: 

device(config-vlan-20)# no management-vlan
History
Release version Command history
08.0.30 This command was introduced.
Parent topic: Commands M