ip radius source-interface
ip radius source-interface
{
ethernet stack-id/slot/port
|
loopback
number
|
management
number
|
ve
number
}
no ip radius source-interface
{
ethernet stack-id/slot/port
|
loopback
number
|
management
number
|
ve
number
}
When a management VRF is configured, the RADIUS client sends RADIUS requests and receives responses only through ports belonging to the management VRF and through the out-of-band management port.
Global configuration mode
When a source interface is configured, management applications use the lowest configured IP address of the specified interface as the source IP address in all the outgoing packets. If the configured interface is not part of the management VRF, the response packet does not reach the destination.
The RADIUS source interface configuration command
ip radius source-interface should be compatible with the management VRF configuration.
The
no form of the command removes the configured interface as the source IP address for
the RADIUS client.