Temparory
In this section:
- Configuring a Cluster for Active-Active High Availability Deployment with a LAG Interface
- Configuring a Cluster for Active-Active High Availability Deployment without a LAG Interface
- Editing an Active-Active Cluster and Nodes
- Access/Core SeparationVirtual Extensible LAN (VXLAN) is used to create a virtual tunnel from the APs back to the RUCKUS Edge cluster. This tunnel allows the APs to behave as if they are directly connected to the data center, even though they are behind NAT and physically remote.
- Configuring RUCKUS Edge Cluster Ports and
IP SettingsThis section provides comprehensive guidance for setting up and managing network interfaces and high-availability features across RUCKUS Edge devices within a cluster. This configuration ensures optimal connectivity, redundancy, and performance for enterprise deployments.
- SD-LAN Services - Enabling NAT-Traversal for
VxLAN-GPE TunnelsNetwork Address Translation Traversal (NAT-T) enables devices located behind a NAT-enabled router to establish and maintain connections with devices on the public internet or across different private networks. NAT-T is particularly important for tunneling protocols, which often struggle to function across NAT boundaries.
- Port ForwardingThe Port Forwarding feature enables external clients to access services hosted on internal servers that are behind RUCKUS Edge. When configured, the RUCKUS Edge device forwards incoming traffic from a specified external port on its public IP (WAN) address to a designated private IP address and port within the LAN.
- Dual-WAN LinkDual-WAN (Wide Area Network) configuration enables a network to operate using two independent internet connections simultaneously. This setup is used to enhance connectivity resilience and ensures uninterrupted network availability by automatically switching traffic between WAN links when a failure is detected.
- Removing the SD-LAN Service from a RUCKUS Edge Device
- Configuring Cluster Interface Settings