Configuring Personal Identity Network for Access Points
In this section:
- DHCP Service on RUCKUS Edge
- Dynamic PSK (DPSK) Service
- Creating a DPSK NetworkCreate a new DPSK network using the newly created DPSK service from Wi-Fi networks.
- Creating Tunnel Profile for the PIN
ServiceA tunnel profile is essential for managing and optimizing the behavior of tunnels between APs and the RUCKUS Edge device. Each Tunnel Profile is linked to a single cluster, and each cluster is confined to a specific venue. APs use tunnel keep-alive request messages to verify the reachability of the RUCKUS Edge device before establishing AP data tunnel and broadcasting WLANs enabled with an SD-LAN service. Once the tunnel is established, APs continue to send periodic keep-alive request messages to monitor the reachability of the Edge device. If the AP does not receive responses for the maximum number of consecutive keep-alive requests, it assumes the Edge is unreachable, brings down the tunnel, and stops broadcasting the WLANs. The AP continues to send periodic keep-alive requests and will reestablish the tunnel and resume broadcasting WLANs upon receiving responses.
- Creating an Identity GroupAn identity group stores user-related data.
- Enabling Property ManagementYou can enable property management in the venue and add property units to it.
- Personal Identity Network Configuration
- Adding a Property UnitA property unit is a Personal Area Network (PAN). PAN is described as a computer network that connects devices within meters. Property unit can be added manually as well as imported from the local system through a .CSV file.
Parent topic: PIN Service