Application Visibility

Feature Overview

The Application Visibility feature is enabled by default on the network. However, administrators have the option to enable or disable this feature at the WLAN level by toggling the Application Recognition & Control option.

Here are some key aspects of application visibility:

  • Identification:
    • Recognizes and categorizes various applications, even if they use the same protocols. For example, HTTP/HTTPS.
  • Monitoring:
    • Continuously tracks application performance and usage in real-time.
    • Provides data on bandwidth consumption.
  • Analysis:
    • Analyzes application traffic to detect patterns, anomalies, and potential issues.
    • Helps in understanding the impact of specific applications on overall network performance.
  • Reporting:
    • Generates reports and dashboards that summarize application usage and performance.
    • Offers insights that help administrators make informed decisions about network management.

The Application Visibility process works as follows:

  1. AP Sends Application Information as Part of Tunnel Metadata: The access point (AP) includes application information within the metadata of the tunnel. This means that details about the applications running on the network are embedded in the data packets sent through the tunnel.
  2. RUCKUS Edge Uses Application-ID Information from AP: The RUCKUS Edge device extracts and utilizes the application-ID information provided by the AP. This allows the Edge device to identify and categorize the applications running on the network.
  3. RUCKUS Edge Reports Applications: The RUCKUS Edge device reports each application, including the source IP address, destination IP address, source port, destination port, and protocol. This detailed information helps in accurately identifying and managing network traffic.

Requirements

This feature has no special hardware or software requirements for feature enablement or usage.

Considerations

This feature has no special considerations pertaining to feature enablement or usage.

Limitations

  • Managing and regulating network traffic and behavior are not supported.
  • IPv6 traffic flows are not supported.
  • This feature is supported only on the SD-LAN service for VxLAN tunneled traffic.

Best Practices

This feature has no special recommendations for feature enablement or usage.

Prerequisites

This feature has no prerequisites to feature enablement or usage.