Using L2oGRE for Ethernet Traffic Aggregation
Feature Overview
RUCKUS Edge provides L2oGRE tunnel support to forward the AP Traffic to a third-party device. It encapsulates Layer 2 wireless traffic from APs and sends it upstream (northbound) to a centralized controller or gateway over a GRE tunnel.
VNI to VLAN Mapping and Forwarding Support: APs can transmit VxLAN-GPE packets with VNI=1 to the Edge device provided the associated WLAN is configured with SSID VLAN ID 1. Upon receiving the packet, the Edge device de-encapsulates the VxLAN-GPE header and forwards the inner payload as an untagged Ethernet frame over the L2GRE tunnel.
Requirements
This feature was introduced in RUCKUS Edge release 2.4.0 and is applicable to all subsequent releases.
Your RUCKUS Edge devices and APs must meet the minimum required firmware version and supported AP models for Tunnel Profile configuration. You can find this information in RUCKUS One by clicking , hovering on the ? icon in the Tunnel Profile tile, and clicking on the displayed See the compatibility requirements hyperlink. The resulting Compatibility Requirement sidebar displays the information.
A third party L2oGRE gateway is required.
Considerations
Consider the following when configuring and using this feature:
Limitations
Best Practices
This feature has no special recommendations for feature enablement or usage.
Prerequisites
This feature has no prerequisites to feature enablement or usage.