Adding VLAN Profile

Virtual Local Area Network (VLAN) connects multiple devices and network nodes from different LANs to one logical network.
Complete the following steps to add a VLAN profile.
  1. On the RUCKUS One navigation bar, select Wired > Wired Network Profiles > Configuration Profiles.
    The Wired Network Profiles page is displayed, defaulting to the Configuration Profiles tab.
  2. Click Add Regular Profile.
    The Add Switch Configuration Profile page is displayed, defaulting to the General tab.
  3. Enter the Profile Name and Profile Description in the General Properties section.

    Configuring General Properties

  4. Click Add VLAN. Enter the following details in the Add VLAN sidebar.
    • VLAN ID - Each port on a switch can be assigned to be a member of VLAN. The VLAN ID is a number between 0-4095. Enter a VLAN ID.
    • VLAN Name - Enter a name to identify the VLAN.
    • IPv4 DHCP Snooping - Internet Protocol version 4 is a protocol and DHCP snooping is a security that prevents unauthorized servers from accessing the network. By default, this option is disabled.
    • ARP Inspection - It is a security feature to inspect Address Resolution Protocol (ARP) packets in a network. By default, this option is disabled.
    • IGMP Snooping - Internet Group Management Protocol (IGMP) is a method switches use to identify multicast groups. Click on the drop-down and select the IGMP Snooping option.
    • Multicast Version- There are three versions of IGMP. Click on the drop-down and select the Multicast Version.
    • Spanning Tree Protocol - It is a network protocol used to prevent looping within a network. Click on the drop-down and select the Spanning Tree Protocol option.

    Adding VLAN

    1. Click Add Model to add a switch model. This displays the Select Ports by Model page. Select the Family and Model and click Next.

      Selecting the Ports by Model

    2. Select the untagged ports (Access Ports) for this model. To select the ports, click on the port numbers and the selected ports are highlighted. Click Next.

      Untagged Ports

    3. Select the tagged ports (Access Ports) for this model. To select the ports, click on the port numbers and the selected ports are highlighted. Click Add. The newly added model with port details are displayed in the Add VLAN page.

      Tagged Ports

    4. Select the model and click Add. The new VLAN ID is displayed in the VLANs section.

      VLANs Page

  5. Click Next to proceed to the Ports page.
  6. Click Set Ports. The Select Ports By Model dialog box is displayed, defaulting to the Select Model tab.
  7. Click Next. This displays the ACLs section.
  8. Click Next to bypass the ACL configuration, as it is not necessary for the PIN setup. This will take you to the Venues section. The venues list is auto-populated. All the associated venues are displayed in the list. Check the box corresponding to the venue name and click Activate.

    Activating Switch Configuration Profile in a Venue

  9. After activating the selected venue, click Next. This displays the Summary section.

    Summary

  10. Verify all the details in the Summary page and click Add. The new VLAN configuration profile is displayed in the Wired Network Profiles page.