Edge Delegation Workflow

The following procedure outlines the steps required to configure Campus Network Delegation within the MSP account and apply templates to end-customer tenants. It also includes additional configurations in the MSP tenant for tunnel and SD-LAN profiles to ensure seamless connectivity and policy enforcement.
  1. From the MSP Tenant account:
    1. Create a tunnel template and select the Edge cluster to the MSP account. Click Templates > Add Template > Services > Tunnel Profile. From the Add Tunnel Profile Template page, enter a Template Name, select a Destination RUCKUS Edge Cluster from the drop-down list, toggle Enable NAT-T Support to on, and click Add.
      Note: The Enforce template configuration option is enabled to prevent ECs from making local changes to the configuration, ensuring consistency and compliance across all deployments.
      For more information, refer to Adding and Managing Configuration Templates.
    2. Create an SD-LAN service profile.
      For more information, refer to Adding an SD-LAN Service for an MSP Account.
    3. (Optional) Create a tunnel profile.

      A tunnel profile template is a predefined configuration with default settings that are used to configure tunnel settings.

      A tunnel profile is a detailed configuration for a network tunnel between APs and RUCKUS Edge devices. For more information, refer to Creating a Tunnel Profile.

      Note: Creating a tunnel profile is optional unless it is set as the forward destination for L2GRE or DMZ tunnels. These tunnel types can be selected during the Wi-Fi Network Selection step of adding an SD-LAN service. Refer to topic Adding an SD-LAN Service for an MSP Account for further details.
  2. From the MSP account:
    1. Create a venue template: Select Templates > Add Template > Venue. From the Add New Venue Template page, enter a Venue Name, Address, and click Add.
    2. Create a Wi-Fi template and activate the venue created in : Select Templates > Add Template > Wi-Fi > Wi-Fi Network. From the Create New Network Template page, enter a Network Name, select Network Type, and select Next. Based on the selected network type, the respective configuration page is displayed. For example: PSK/SAE or Opens → the Settings page, DPSK → DPSK Settings page, AAA → AAA Settings page, and Captive Portal → Portal page. After configuring the reepective network type page, click Next, the Venues page is displayed. The From the Venues page, toggle the Activated option . This enables deployment of the network to all APs linked to that venue. Toggle Networking Tunneling–by default, the available tunneling method is SD-LAN. Select associated SD-LAN service from the Select SD-LAN Service page and click Apply. Choose the forwarding destination based on the network topology. For example: Core (default centralized forwarding), L2GRE (Layer-2 GRE tunnel), DMZ (external forwarding) and click Add. Click Next > Add.
  3. Apply the venue template, Wi-Fi template, and tunnel template to the EC tenant.