Creating a Tunnel Profile – From Templates (MSP Tenant)

In an Edge Delegation setup, Tunnel Profiles are delivered exclusively via MSP‑level Tunnel Profile Templates. EC tenants can only view these profiles in read‑only mode. All updates, including changes to Tunnel Encryption, must be performed on the MSP template and propagated to EC tenants through apply or sync.
To create a Tunnel Profile Template (MSP Tenant):
  1. From the MSP Account, go to Templates > Add Template > Services > Tunnel Profile.
  2. From the Add Tunnel Profile Template page, enter the required details:
    • Template Name: Provide a meaningful name for the Tunnel Profile Template.
    • Destination RUCKUS Edge Cluster: Select the target Edge Cluster from the drop‑down list.
      Note: The Edge Cluster must already be onboarded in the MSP tenant.
    • Tunnel Encryption: Toggle ON if VxLAN‑GPE encryption is required.

      When enabled:

      • The IPSec Profile selection field becomes available.
      • NAT‑T Support is automatically enabled and cannot be disabled while encryption is active.
      • All AP tunnels will tear down and re‑establish; perform this action during a maintenance window.
    • Add IPSec Profile: If needed, click Add (inside the Tunnel Encryption section) to create a new IPSec Profile Template.
  3. Click Add to create and save the Tunnel Profile Template.
  4. Use the Apply Template workflow to assign the Tunnel Profile Template to the appropriate customers.