Configuring RUCKUS Edge Cluster Ports and IP Settings

This section provides comprehensive guidance for setting up and managing network interfaces and high-availability features across RUCKUS Edge devices within a cluster. This configuration ensures optimal connectivity, redundancy, and performance for enterprise deployments.

Cluster configuration allows multiple RUCKUS Edge devices to operate as a unified system, providing seamless failover, load distribution, and simplified management. Proper configuration is critical for maintaining service continuity.

Operational Advantages:

  • High Availability: Ensures failover between nodes and WAN links.
  • Scalability: Supports multi-node clusters for large deployments.
  • Flexibility: Allows granular control of ports, VLANs, and IP addressing.
  • Security: Utilizes NAT to regulate and manage external access.

    Note:
  • All Edge devices must be operational and added to the cluster.
  • WAN and LAN interfaces should be physically connected and configured.
  • Internal servers should have static IP addresses.
  • Ensure no conflicting NAT or firewall rules exist.
Complete the following steps to configure the RUCKUS Edge cluster:
  1. From the RUCKUS One navigation bar, select Gateway > RUCKUS Edge.
    This displays a list of the RUCKUS Edge clusters and devices added to the RUCKUS One tenant account.
    Note: RUCKUS recommends using the Cluster & RUCKUS Edge configuration wizard to configure these settings.
  2. Select the checkbox beside the cluster and click Run Cluster & RUCKUS Edge configuration wizard.
    This displays the Cluster & RUCKUS Edge Configuration Wizard page.
  3. Select LAG, Port, Sub-Interface & Virtual IP Settings and click Next.
    The Cluster & RUCKUS Edge Configuration Wizard page is displayed.
  4. Within the wizard, configure the following:
    • Link Aggregation Groups (LAGs): Combine multiple physical links for bandwidth and redundancy. Refer to LAG Settings, for more information.
    • Port General Settings: Define WAN/LAN roles, IP assignment, and NAT service options. Refer to Port General Settings, for more information.
    • Sub-Interface Settings: Support VLAN segmentation and multi-network environments. Refer to Sub-interface Settings, for more information.
    • Dual WAN Configuration: Configure active-backup WAN links for failover. Refer to Dual WAN Settings, for more information.
    • Cluster Virtual IP: Assign a floating IP for uninterrupted communication. Refer to Cluster Virtual IP, for more information.
    Alternatively, you can configure LAG and Ports using the following procedure for each RUCKUS Edge device in a cluster:
    1. From the RUCKUS One navigation bar, click on Gateway > RUCKUS Edge.

      This displays the RUCKUS Edge devices.

    2. Select an Edge cluster and click the icon to expand and view the associated devices.
    3. Click on the device name. This displays the Overview page.
    4. From the Overview page:
      • Click the Configure button in upper-right hand corner and click the Ports or LAGs sub-tab.
      • Click the Ports or LAGs tab and click Configure Port Settings or Configure LAG Settings, respectively.
    5. Proceed with Port General Settings or LAG Settings.
  5. From the Summary page, review the configuration and click one of the following:
    • Apply & Continue to proceed to the Cluster Interface Settings configuration.
    • Apply & Finish to complete the LAG, Port, Sub-interface & Virtual IP Settings configuration without proceeding to the Cluster Interface Settings configuration.