Tunnel Profile

A tunnel profile is essential for managing and optimizing the behavior of tunnels between access points (APs) and the RUCKUS Edge device. Each Tunnel Profile is linked to a single cluster and each cluster is confined to a specific venue.

A tunnel profile is needed in SD-LAN because it defines the tunnel type (VxLAN-GPE / L2GRE), MTU, keepalives, and optional encryption for AP–Edge and Edge–Edge tunnels. With a tunnel profile, SD-LAN has a consistent, manageable way to establish and maintain those tunnels.

You must create at least one Tunnel Profile with Tunnel Type as VxLAN GPE, which is essential configuration to bring up tunnels between AP-DC Edge Cluster nodes. NAT-T and Encryption are supported for VxLAN-GPE tunnels between an AP and an Edge node. These features can be enabled on the tunnel profile for AP-DC Edge cluster.

Based upon the requirement of forwarding destination as DMZ tunnel destination for Edge or L2GRE tunnel destination,more than one tunnel profile can be configured.

  • For DMZ tunnel: Tunnel profile has DMZ as destination cluster. Only Manual MTU is supported. NAT-T and Encryption is not supported for the tunnels between DC and DMZ Edge clusters
  • For L2GRE Tunnel: Tunnel Profile has type as L2GRE, within this profile the IP address of the L2GRE destination is specified