Active Standby High Availability Mode

The Active Standby High Availability mode is a configuration that ensures continuous network service by having two identical devices where one acts as the active unit and the other acts as a standby unit.

Overview

In Active‑Standby High Availability mode, two Edge devices can be onboarded to a Cluster on RUCKUS One. One device operates as the Active unit, while the second remains in Standby. If the Active device experiences a failure, the Standby unit automatically assumes control, ensuring minimal service interruption and maintaining network connectivity. This configuration is recommended for critical environments where even brief downtime is unacceptable.

Requirements

The Cluster Interface is essential for enabling clustering in RUCKUS Edge. To configure it, a distinct physical interface must be provided within the RUCKUS Edge. This interface facilitates the exchange of cluster information, cluster formation, and node health maintenance. For each node in the dual-node cluster, this interface should be connected to the same Layer 2 network, separate from the LAN network.

The port or LAG connecting to the core switch from the RUCKUS Edge device should be configured as an IEEE 802.1w (RSTP) edge port or LAG. This configuration ensures faster transitions of the port or LAG to the RSTP forwarding state, which is crucial for correct VRRP role selection convergence.

Considerations

In the RUCKUS Edge-deployed networks, active and standby nodes maintain communication and in the event of a failover, the below scenario is established:

  • If the active node does not respond, the standby node becomes the active node.
  • After the failed active node is operational and rejoins the cluster, it becomes the new standby node.

Best Practices

This feature has no special recommendations for feature enablement or usage.

Prerequisites

This section lists all the prerequisites to support Active-Standby High Availability on RUCKUS Edge.

  • Install two RUCKUS Edge devices as there should be two nodes for the cluster to operate.
  • Create a venue and associate the RUCKUS Edge cluster.