Cluster Virtual IP

The Cluster Virtual IP is a shared IP address that floats between nodes in the Edge cluster. It acts as the primary point of contact for external devices—such as APs, switches, or the controller—ensuring seamless communication even if one node fails. Configure the virtual IP interface and the failover settings for all RUCKUS Edge devices in this cluster.
  1. Click Select Interface.
    The Select Interfaces sidebar is displayed.
  2. Select the interface from the Select Port drop-down.
  3. Click OK.
    The Node Name, Interface, and IP Subnet are added.
  4. For Virtual IP Address, enter the virtual IP address for the RUCKUS Edge cluster.
  5. For Failover Settings, slide the marker on the HA Timeout timeline bar to adjust the amount of time allowed to elapse before triggering a failover.
    Note: An HA failover time of 6 seconds or longer is recommended for RUCKUS Edge use-cases. A timer set to less than this is very aggressive and could potentially cause VRRP issues in some networks. HA timeout refers to the time period within which a node must receive a periodic heartbeat signal from the active node. If the timer expires prior to receiving a heartbeat signal, then the system initiates the failover process to select the next active node and maintain system functionality.
  6. Click Next.
    The Summary page is displayed.