System IPsec

System IPSec refers to the IPSec tunnel established between the SmartZone (SZ) and an external syslog server. All System IPSec tunnels support NAT traversal. This provides centralized configuration and management of IPSec settings used to secure GRE-based tunnels such as SoftGRE. System IPsec is the IPsec tunnel between SZ and external syslog server. All IPsec tunnels are NAT traversal.

By enabling encryption and authentication, System IPSec ensures the secure transmission of wireless client and control traffic between access points and controllers or data plane nodes across untrusted or routed networks. System IPSec profiles are created and applied to tunnel configurations, allowing consistent security policies across deployments. This approach simplifies management, enhances scalability, and maintains a secure network posture.

Note: Internet Key Exchange version 2 (IKEv2) is the only supported key management protocol for establishing IPSec tunnels.

In the event of an unintentional interruption of the connection between the SmartZone and the IPsec gateway:

  • The connection may need to be re-established by clicking Re-connect in the GUI.
  • An interruption exceeding the IKE rekey timeout causes the system IPsec to go down and triggers system event #99104 to notify users.
  • An interruption within the IKE rekey timeout results in the system IPsec sending retransmission requests to the gateway every 10 seconds until the IKE rekey timeout is reached or 360 retransmission attempts are completed.