Establishing SSH Access to SmartZone Using Public Key Authentication

To establish SSH access to the SmartZone (SZ) controller using public key authentication from any Linux-based client system.

To do this, the user must first generate an RSA or ECDSA key pair on the client machine. The public key must then be uploaded to the SZ controller under the SSH Authentication settings. After configuration, the corresponding private key should be used on the client device to initiate the SSH connection to the SZ. This setup allows secure, passwordless login and ensures compliance with modern authentication standards.

Use the following commands on a Linux client machine to generate ECDSA or RSA SSH key pairs. The public key must be uploaded to the SZ controller, and the private key must be securely stored on the client for SSH authentication.

  • To generate ECDSA key pair, use the below command -
    ssh-keygen -t ecdsa -C "ECDSA_Keypair-10" -f ecdsa1
    • ecdsa1 – Private key (used on the client for SSH access)
    • ecdsa1.pub – Public key (upload this to SmartZone)
  • To generate RSA key pair, use the below command -
    ssh-keygen -t rsa -C "RSA_Keypair-1" -f rsa1
    • rsa1 – Private key (used on the client for SSH access)
    • rsa1.pub – Public key (upload this to SmartZone)