Importing New Certificates
To secure HTTPS access, a signed Secure
Sockets Layer (SSL) certificate can be imported into the controller. This enables
encrypted
and trusted communication between the controller and connected clients.
Ensure that all required certificate files are available and meet the format and size requirements.
Copy the signed certificate file, intermediate CA certificate file, and private key file to a location on the local drive or a network share that is accessible from the controller web interface.
Note: The file size of each signed certificate and intermediate
certificate must not exceed 8192 bytes. Certificates exceeding this limit cannot be
imported into the controller.
To import a signed client certificate, perform the following:
- From the main menu, navigate to . This displays the SZ as Client Certificate page.
- Click Import. This displays the Import Client Certificate window.
- Enter the following:
- Name - Provide a name to identify the certificate.
- Description - Add a brief description of the certificate.
- In the Client
Certificate section - To upload a certificate, select the
corresponding checkbox, click Browse,
and choose the file from the local system.
- Up to four Intermediate CA certificates can be uploaded to
establish a complete chain of trust with the signed certificate.
Use only
.CRTor.PEMfile formats to upload the Intermediate CA certificate. - If the SSL certificate is used for a Hotspot 2.0 configuration, a Root CA certificate must also be imported.
- The Private Key can be imported either by uploading the key file or by selecting a previously generated Certificate Signing Request (CSR).
- Up to four Intermediate CA certificates can be uploaded to
establish a complete chain of trust with the signed certificate.
Use only
- Click OK.