Configuring Security Options for WLAN
Encryption options include several
security modes that define how data is encrypted and protected on the WLAN, and can
be
configured based on deployment requirements.
- WPA2 - Provides secure encryption using AES, widely supported across devices.
- WPA3 – Uses stronger encryption and enhanced security mechanisms compared to WPA2.
- WPA2/WPA3-Mixed – Allows both WPA2 and WPA3 clients to connect, ensuring compatibility during migration.
- OWE (Opportunistic Wireless Encryption) – Provides encryption on open networks without requiring authentication.
- OWE Transition – Supports both encrypted OWE connections and traditional open connections for backward compatibility.
- From the main menu, navigate to .This displays the Wireless LANs screen.
- In the Wireless
LANs screen, select a zone and click
Create.This displays the Create WLAN Configuration window.
- In the Create WLAN
Configuration window, navigate to Encryption
Options and select Method type as
per the deployment requirements.
- Algorithm
- Specifies the cipher used to encrypt data. By default, the AES
algorithm is selected.
- AES - Advanced Encryption Standard (AES) is a highly secure encryption algorithm used to protect data. It provides strong security by encrypting data in blocks of 128 bits, making it very difficult for unauthorized users to decrypt the information.
- Auto - This setting allows the network to automatically select the best available encryption algorithm. It typically defaults to AES if supported by all devices, ensuring both security and compatibility.
- Passphrase - A password used to generate the encryption key. The passphrase should be atleast 15 characters long and contain atleast 2 each of the following: uppercase, lowercase, numbers, and special characters except for ' $ and (.
- SAE Passphrase - Simultaneous Authentication of Equals (SAE) is a key exchange protocol that provides robust protection against offline dictionary attacks by using a secure, mutual authentication process. The passphrase is used to generate cryptographic keys that encrypt the data transmitted over the network, ensuring that only authorized devices can access and communicate securely.
- 802.11r Fast Roaming - This feature allows seamless transition between Access Points (supported by Wi-Fi 5 and Wi-Fi 6 APs). It works by pre-authenticating devices with multiple Access Points, reducing the time needed to switch connections and ensuring uninterrupted connectivity. Switch the toggle to ON and enter a Mobility Domain ID. The Mobility Domain ID is used by IEEE 802.11r to define a scope of the network in which a Fast Roaming is supported. Master keys are shared within the Mobility Domain, allowing clients to take advantage of fast roaming.
- 802.11w MFP - Management Frame Protection, which secures management frames from unauthorized alterations is supported by Wi-Fi 4 (IEEE 802.11n) and later standards. It works by encrypting management frames, ensuring that only authenticated devices can interpret and act on these frames. The following option is preselected and cannot be changed:
- Reserve SSID - Enable this option to reserve the SSID. A reserved SSID is broadcast only if the AP loses connectivity to the controller or Data Plane, and activates 3 minutes after heartbeat loss is detected. By default, this option is disabled.
- Transition Disable Indication - When this option is enabled, the AP will instruct the wireless client to disable certain transition modes for future connections to the AP's network. This information is included in the Transition Disable Key Data Element (KDE). The client should disable all transition algorithms requested if it supports the most secure algorithms. Additionally, the client must disable WEP and TKIP encryption methods and disallow associations without Protected Management Frames (PMF).
- Algorithm
- Specifies the cipher used to encrypt data. By default, the AES
algorithm is selected.