RUCKUS FIPS and Common Criteria Configuration Guide for SmartZone and AP, 7.1.1.3
- Preface
- 4 About This Guide
- 5 Federal Information Processing Standards
- Virtual SmartZone Installation with FIPS Image
- 6 vSZ Installation with FIPS Image
- 7 vSZ-D FIPS Installation with FIPS Image
- 8 Controller Configuration with FIPS Image
- 8.1 Using FIPS-Related CLI Commands
- 8.2 CLI Commands for Configuration
- 8.2.1 cluster-ipsec conn
- 8.2.2 cluster-ipsec disable
- 8.2.3 https-client-security-level
- 8.2.4 https-server-security-level
- 8.2.5 ssh-security-level
- 8.2.6 tls-ems-enforced
- 8.2.7 tls13-outbound
- 8.2.8 tls13-port-8443
- 8.2.9 show fips-version
- 8.3 Viewing and Downloading FIPS Logs
- 8.4 Uploading Certificates to SmartZone Controller
- 8.5 Enabling Other Secured Communication Services
- 8.5.1 External Syslog Server
- 8.6 RadSec - TLS Encrypted RADIUS Protocol
- 8.7 Upgrading the Software
- AP Configuration in FIPS Mode
- 9 AP Configuration in FIPS Mode
- 9.1 Creating an AP Zone
- 9.2 X.509 Certificates
- 9.3 AP Models that Support FIPS Mode
- 9.4 Joining AP to (v)SZ Controller
- 9.5 Management Channel between AP/vSZ-D and Controller
- 9.6 Configuring Regular Mesh
- 9.7 FIPS AP Behavior
- 9.8 Crypto Officer Roles and Responsibilities for AP
- 9.9 Quarantine State for AP
- 9.10 AP Feature Limitations in FIPS Mode
- 9.11 Configuring Security Options for WLAN
- 9.12 Configuring Recovery SSID
- 10 SSH Authentication Method
- 11 Session Management
- 12 Password Management
- 13 SoftGRE
- 14 RUCKUS Generic Routing Encapsulation (RGRE)
- 15 System IPsec
- 16 IPsec Support for SmartZone Clustering
- 17 Configuring System Time
- 9 AP Configuration in FIPS Mode
- 18 Administrating the Controller
- 19 Configuring FIPS Disable Mode
- Wireless Intrusion Detection and Prevention System
- 20 Wireless Intrusion Detection and Prevention
System
- 20.1 Allowed Device Profile
- 20.2 Monitoring Access Points (APs)
- 20.2.1 Creating a Monitoring Zone
- 20.3 Signature Based Detection Rule
- 20.4 Rogue Devices
- 20.4.1 Configuring a Rogue Classification Policy
- 20.4.2 Viewing Rogue Devices
- 20.4.3 Filtering Rogue Devices
- 20.4.4 Marking Rogue Access Points
- 20.4.5 Locating a Rogue Device
- 20.4.5.1 Upload a Map
- 20.4.6 Viewing Rogue Access Points and Clients Reports
- 20.5 Audit/Event Alert
- 20.6 AP MAC OUI Address
- 20.7 Different Rule types and Classification
- 21 FIPS 140-3 Security Certification
- 21.1 FIPS 140-3 Compliance
- 21.2 Zeroization
- 22 Specific Module Software Versioning
- 20 Wireless Intrusion Detection and Prevention
System
- Tamper-evident Seals
- Trusted Channels through TSF
- FIPS-compliant Products
- 26 Connecting the Switches to Controller
- 27 Two-Factor Authentication
- 28 Events
- 28.1 Fails to establish TLS tunnel between SZ and External AAA Server
- 28.2 SZ Login fail
- 28.3 SZ Login
- 28.4 SZ Logout
- 28.5 Unsync NTP time
- 28.6 SZ Failure of Certificate
- 28.7 NodeRebooted
- 28.8 NodeShutdown
- 28.9 Auditable Events in AP and DP for Common Criteria
- 29 Audit Records