Creating Switch Groups

By creating switch groups, multiple switches with similar configurations can be efficiently managed by streamlining network management tasks.

You can create a maximum of two levels within the group hierarchy. All switches are initially placed in the default switch group. Switches in the default switch group can be allocated to a group or sub-group. Additionally, you can modify or delete a group at any time.

After the switch is registered with the controller interface, you can monitor, view status or usage, and perform some basic management, including configuration backups and firmware management. However, you cannot configure the switch from the controller web user interface.

Note: SmartZone uses port 443 for TLS requests. Starting from version 10.0.10f or higher, switches use port 443 (default HTTPS port) for TLS communication. The switches use an ECDSA key during the TLS handshake. So, the switch group SSH/TLS Enhance Mode option is hidden from this release.
Note: The command open-icx-management is not available from the current release.
  1. In the main menu, click Network > Wired > Switches.
    This displays the Switches screen.
  2. Select System in the Organization hierarchy and click the icon.
    This displays the Create Domain screen. To change to Create Switch Group screen, select Switch Group in the Type field.
  3. In the Create Switch Group screen, enter the following details:
    1. Name: Enter a descriptive name for the Switch Group.
    2. Description: Enter a concise and meaningful description.
    3. Firmware Version: Select the firmware version from the drop-down list (F10010h). To add a new version, click on the icon next to the Firmware Version field.
    4. Type: Select Switch Group.
    5. Parent Group: Displays the parent group under which the switch group is categorized.
    6. Two Factor Authorization: By default, this functionality is OFF. To enable the Two Factor Authorization, click the toggle button.
  4. Backup Schedule: A routine to create backups of data or system configuration, in case of data loss or system failure. To create a back-up schedule, perform the following:
    1. Interval: Select the interval by clicking on the drop-down list. The options available are:
      • Daily: Enter the Hour and Minute.
      • Weekly: Enter the day of the week in Every field, and the Hour and Minute in their respective fields.
      • Monthly: Enter the date of the month in Every field, and the Hour and Minute in their respective fields.
  5. Click OK.
    The switch group is created under the selected parent group.
  6. After creating the new switch group move the selected APs.