In the Dedicated mode, a Dedicated Master AP
or member AP working behind NAT is supported.
Basic NAT Topologies
You can follow three basic NAT
topologies:
- Member AP behind NAT
- Dedicated Master AP behind NAT
- Both Dedicated Master AP and member AP behind NAT
Configuration Requirements for Ports or IP
Addresses for NAT Topologies
You must configure the following port mapping for
the service to work properly for NAT topologies:
- Member AP behind NAT: Port configuration
is not required.
- Dedicated Master AP behind NAT:
- UDP port 12222, 12223, 60000 and TCP
port 443 are configured to the private IP address of the Dedicated Master AP in the
NAT mapping table.
- The member AP must connect to the WAN
IP address of NAT by Layer 3 (that is, the public IP address in the NAT mapping table
of the Dedicated network).
- Both Dedicated Master AP and Member AP
behind NAT:
- UDP port 12222, 12223, 60000 and TCP port 443 are configured to the private IP
address of the Dedicated Master AP in the NAT mapping table.
- The member AP must connect to the WAN
IP address of NAT by Layer 3 (that is, the public IP address in the NAT mapping table
of the Dedicated network).