Working with 802.1X on Wired Ethernet Ports
802.1X authentication consists of the following three components:
- Supplicant: The supplicant sends access request messages along with credentials, such as user name / password or digital certificate, to an authenticator, which forwards the credentials to the authentication server for verification.
- Authenticator: The authenticator challenges the identity of the supplicant, then passes its credentials to the AAA server. If the credentials are accepted the supplicant is allowed access.
- Authentication Server (AAA Server): The AAA server verifies the supplicant's credentials and permits or rejects its request for access.
For wired 802.1X, a Ruckus AP's Ethernet port can be configured as either an Authenticator or as a Supplicant, depending on which port type is selected. The following tables describe the 802.1X roles available by port type.
Authenticator support by port type
| Trunk Port | Access Port | General Port | |
|---|---|---|---|
| Port-based mode | X | X | X |
| MAC-based mode | X |
The following considerations apply:
- A single port cannot be configured as both an Authenticator and Supplicant at the same time.
- Only one port per AP can be configured as a Supplicant.
- If the AP is connecting to a switch port with 802.1X authentication enabled, the AP’s port type should be configured as a Trunk Port and its role should be configured as Supplicant. The switch port should be configured as a Trunk port in Port-based Authenticator mode.
- If there are multiple devices connected to an AP port (through a downstream switch), the port can be configured as either Port-based or MAC-based Authenticator. In Port-based mode, only one of the attached MAC hosts must be authorized for all hosts to be granted access to the network. In MAC-based mode, each MAC host is individually authenticated.
- If a Trunk Port is configured as a Supplicant, a user name and password must be entered to authenticate the port to the 802.1X aware LAN switch.
- If an Access Port is configured as an Authenticator, the administrator must define the RADIUS server that the Authenticator communicates with. All Ethernet ports of a single AP are configured with the same RADIUS server.
Enable MAC authentication bypass: If MAC authentication bypass is enabled, the port first attempts to authenticate the attached device by MAC address, and if that fails, it attempts to authenticate the device using 802.1X.