RUCKUS Standard AP LED Description

PWR LED

Status Description
Off The AP is not being managed by controller.
Red Boot-up is in process.
Green The AP is being managed by controller.

CTL LED

Status Description
Off The AP is not being managed by controller (standalone mode).
Green The AP is being managed by controller.
Slow flashing green (one flash every two seconds) The AP is being managed by controller, but is currently unable to communicate with controller.
Fast flashing green (two flashes every second) The AP is being managed by controller and is currently receiving configuration settings (provisioning) or a firmware update.

AIR LED

Status Description
Off The AP is operating as a standalone or Root AP (RAP), or as a non-mesh AP.
Green The AP is functioning as a Mesh AP (MAP), and the wireless signal to its uplink AP is good.
Slow flashing green (one flash every two seconds) Mesh networking is enabled, but the AP is still searching for a mesh uplink.
Fast flashing green (two flashes every second) The AP is functioning as a Mesh AP (MAP), and the wireless signal to its uplink AP is fair.

2.4GHz LED

Status Description
Off The WLAN service is down.
Green The WLAN is up and at least one client is associated.
Amber The WLAN is up. No clients are associated.

5GHz LED

Status Description
Off The WLAN service is down.
Green The WLAN is up and at least one client is associated. No downlink MAPs are connected.
Amber The WLAN is up, but no clients or downlink MAPs are associated/connected.
Slow flashing green (one flash every two seconds) The WLAN is up and at least one downlink MAP is connected. No clients are associated.
Fast flashing green (two flashes every second) The WLAN is up, at least one downlink MAP is connected, and at least one client is associated.

6GHz LED

Status Description
Off The WLAN service is down.
Blue The WLAN is up and at least one client is associated. No downlink MAPs are connected.
Amber The WLAN is up, but no clients or downlink MAPs are associated/connected.
Slow flashing green (one flash every two seconds) The WLAN is up and at least one downlink MAP is connected. No clients are associated.
Fast flashing green (two flashes every second) The WLAN is up, at least one downlink MAP is connected, and at least one client is associated.