VLAN Settings Overview
A Ruckus AP is in many ways like a network switch -- with the capability to service Wi-Fi connections. As such, like many advanced switches, Ruckus APs conform to the IEEE 802.1Q standard -- the standard that defines virtual LANs. In an 802.1Q switch, the concept of VLANs is always present. If a packet arrives without an 802.1Q header, it is assigned to the "Native VLAN" (aka, "Untag VLAN").
Each of the AP's wireless interfaces can be assigned to a single VLAN. When a packet enters the AP through its wireless interface, the packet is assigned to the Access VLAN configured on the Configuration > Wireless page (by default, 1).
AP Ethernet ports however, can be configured to pass all VLAN traffic (Trunk Ports) or multiple specific VLANs (General ports).
The VLAN displayed in the web interface shows the AP's view of the VLAN environment; when a packet arrives at an AP's Ethernet port, the port's VLAN configuration helps determine if the packet is accepted or not (VLAN membership), and assigns a default VLAN (untag VLAN) if the packet contains no 802.1Q header.
In general, if your network has VLANs deployed already, you should apply VLAN configuration to Ruckus APs so that the configuration is consistent across the network.