Connect the AP to the Administrative Computer

Connect the AP to the admin computer using an Ethernet cable.
Caution: Do NOT connect the AP to your live network at this point. If you connect it to a live network with an active DHCP server, the AP acquires a new IP address from DHCP and you will be unable to access it via the default IP address (192.168.0.1).
  1. Connect one end of an Ethernet cable to an Ethernet port on the AP, and then connect the other end to the administrative computer's Ethernet port.
  2. Provide power to the AP using either an AC adapter or a PoE injector or switch.