Performing a Site Survey

Before installing the AP, perform a site survey to determine the optimal AP placement for maximum range, coverage, and network performance.

Ruckus Support can supply Site Survey best practices information. When performing a site survey, consider the following factors:

  • Data rates: Range is generally inversely proportional to data rates. The maximum radio range is achieved at the lowest workable data rate. Higher data rates are generally achieved at closer distances.
  • Antenna type and placement: Proper antenna configuration is a critical factor in maximizing radio range. As a general rule, radio range is increased by mounting the antennas higher off of the ground.
  • Physical environment: Clear or open areas provide better radio range than crowded or filled areas. The less cluttered the operating environment, the greater the wireless range.
  • Obstructions, building materials, and sources of interference: Physical obstructions, such as concrete pillars, steel beams and filing cabinets can block or hinder wireless communication. Avoid installing the AP in a location where there is an obstruction between sending and receiving devices. A number of machines and electronic devices that emit radio waves – cranes, wireless phones, microwave ovens, and satellite dishes – can interfere with and block wireless signals. Building materials used in construction also influence radio signal penetration. For example, drywall construction permits greater range than concrete blocks.

For more AP placement guidelines, refer to Determining the Optimal Mounting Location and Orientation.