Upgrading the Firmware Image

You can use the web interface to check for software updates/upgrades for the firmware image built into the AP.

You can then apply these updates to the device in one of two ways: manual updating on an as-needed basis, or automating a regularly scheduled update.

Before starting, decide which option you want to take:

  • Automate a regularly scheduled update
  • Run a one-time manual update right now

By default, the automatic upgrade option is disabled.

To upgrade the firmware image, go to Maintenance > Upgrade. When the Upgrade Method options appear, decide which upgrade method to use. Each of the upgrade options listed on the Upgrade page are discussed in the succeeding sections.

The Maintenance > Upgrade page