Configuring NTP Server and Management VLAN

A Network Time Protocol (NTP) Server should be configured to ensure that the AP maintains the correct time.

NTP Server

The default Ruckus NTP Server (ntp.ruckuswireless.com) can be used if you do not have an NTP server that you prefer to use.

If you want the AP to contact a different NTP server, you can do so by going to Configuration > Internet and entering the host name in NTP Server at the top of the page.

Management VLAN

Caution: Changing the Management VLAN causes you to be immediately disconnected from the web interface if the computer you are using is not on the same VLAN. Do not change the Management VLAN unless your admin PC is on the same VLAN. Otherwise, you will be disconnected and unable to connect again without factory resetting the AP.

If you want to place this AP's management traffic into a management VLAN, enter the VLAN ID in the Management VLAN field and then click Update Settings.