Rebooting the AP

You can use the web interface to prompt the AP to reboot, which simply restarts the AP without changing any of the current settings.
Please note that rebooting the AP disrupts network communications in any currently active WLANs.
  1. Go to Maintenance > Reboot/Reset.
  2. Click Reboot Now. After a brief pause, you are automatically logged out of the AP.

    The Maintenance > Reboot/Reset page

After approximately one minute, you should be able to log back into the AP, which verifies that the reboot was successful. You can also check the LEDs on the AP to verify the status of the device.