Resetting the AP to Factory Defaults

You can use the web interface to restore an AP to its factory default settings, which completely erases the configuration currently active in the device.
Caution: DO NOT reset the AP to factory defaults unless you intend to reconfigure the AP from the start. Do this only if you are able to reconnect to the factory default AP and perform the initial setup procedures, as described in Configuring the AP for Standalone Operation.
  1. Go to Maintenance > Reboot/Reset.
  2. Click Reset now next to Reset to factory settings.
  3. When the confirmation warning appears, read the message and click OK if you are certain that you want to restore the AP to factory defaults.