Use the Administration > Management page to view FlexMaster management status.
If you configure the AP to be managed by FlexMaster, you can view the
TR-069 Status section on the
Administration > Management page.
TR-069 status information
_v5_GUID-29E84B4F-3F96-4605-BF2E-5DF9B244D4F4/TR069-Status=GUID-7E1E204F-3947-4CD9-B4DD-2F63213ED9A4=1=en-US=Low.png)
The following table lists the TR-069 status information that the AP provides.
TR-069 status information
| Status Information
|
Description
|
| Currently Using URL
|
Shows the FlexMaster server IP address or URL with which the AP is currently registered.
|
| Last Attempted Contact
|
Shows the date and time of the AP’s last attempt to contact FlexMaster. Date and time
are specified in GMT (or UTC), which are accurate if a Network Time Protocol (NTP)
server is configured.
|
| Last Successful Contact
|
Shows the date and time of the AP’s last successful contact with FlexMaster.
|
| Last Contact Result
|
Shows the result of the last attempt to contact FlexMaster (success or failure, and
failure error code if applicable).
|
| Current Time
|
Shows the current date and time as known to the AP. This timestamp is accurate if
an NTP server is configured on the AP. If there is no NTP server configured, this
timestamp is useful as a reference for comparison of the timestamps for
Last attempted contact and
Last successful contact.
|